NAME

mbimcli - Control MBIM devices

DESCRIPTION

Usage:

mbimcli [OPTION?] - Control MBIM devices

Help Options:

-h, --help: Show help options
--help-all: Show all help options
--help-basic-connect: Show Basic Connect Service options
--help-phonebook: Show Phonebook Service options
--help-dss: Show Device Service Stream options
--help-ms-firmware-id: Show Microsoft Firmware ID Service options
--help-ms-host-shutdown: Show Microsoft Host Shutdown Service options
--help-ms-sar: Show Microsoft SAR Service options
--help-atds: Show AT&T Device Service options
--help-intel-firmware-update: Show Intel Firmware Update Service options
--help-ms-basic-connect-extensions: Show Microsoft Basic Connect Extensions Service options
--help-quectel: Show Quectel Service options
--help-link-management: Show link management specific options
--help-intel-thermal-rf: Show Intel Thermal RF Service options
--help-ms-voice-extensions: Show Microsoft Voice Extensions Service options
--help-ms-uicc-low-level-access: Show Microsoft UICC Low Level Access Service options

Basic Connect options:

--query-device-caps: Query device capabilities
--query-subscriber-ready-status: Query subscriber ready status
--query-radio-state: Query radio state
--set-radio-state=[(on|off)]: Set radio state
--query-device-services: Query device services
--query-pin-state: Query PIN state
--enter-pin=[(PIN type),(current PIN)]: Enter PIN (PIN type is optional, defaults to PIN1, allowed options: (pin1,network-pin,network-subset-pin,service-provider-pin,corporate-pin)
--change-pin=[(current PIN),(new PIN)]: Change PIN
--enable-pin=[(current PIN)]: Enable PIN
--disable-pin=[(PIN type),(current PIN)]: Disable PIN (PIN type is optional, see enter-pin for details)
--enter-puk=[(PUK type),(PUK),(new PIN)]: Enter PUK (PUK type is optional, defaults to PUK1, allowed options: (puk1,network-puk,network-subset-puk,service-provider-puk,corporate-puk)
--query-pin-list: Query PIN list
--query-home-provider: Query home provider
--query-preferred-providers: Query preferred providers
--query-visible-providers: Query visible providers
--query-registration-state: Query registration state
--register-automatic: Launch automatic registration
--query-signal-state: Query signal state
--query-packet-service-state: Query packet service state
--attach-packet-service: Attach to the packet service
--detach-packet-service: Detach from the packet service
--query-connection-state=[SessionID]: Query connection state (SessionID is optional, defaults to 0)
--connect=["key=value,..."]: Connect (allowed keys: session-id, access-string, ip-type, auth, username, password, compression, context-type)
--query-ip-configuration=[SessionID]: Query IP configuration (SessionID is optional, defaults to 0)
--disconnect=[SessionID]: Disconnect (SessionID is optional, defaults to 0)
--query-packet-statistics: Query packet statistics
--query-ip-packet-filters=[SessionID]: Query IP packet filters (SessionID is optional, defaults to 0)
--set-ip-packet-filters=["key=value,..."]: Set IP packet filters (allowed keys: session-id, packet-filter, packet-mask, filter-id)
--query-provisioned-contexts: Query provisioned contexts
--set-provisioned-contexts=["key=value,..."]: Set provisioned contexts (allowed keys: context-id, context-type, auth, compression, username, password, access-string, provider-id)
--set-signal-state=["key=value,..."]: Set signal state (allowed keys: signal-strength-interval, rssi-threshold, error-rate-threshold)
--set-network-idle-hint=[(enabled|disabled)]: Set network idle hint
--query-network-idle-hint: Query network idle hint
--set-emergency-mode=[(on|off)]: Set emergency mode
--query-emergency-mode: Query emergency mode
--set-service-activation=[Data]: Set service activation

Phonebook options:

--phonebook-query-configuration: Query the phonebook configuration
--phonebook-read=[(Phonebook index)]: Read phonebook entry with given index
--phonebook-read-all: Read all phonebook entries
--phonebook-write=[(Name),(Number)[,(Index)]]: Add new phonebook entry or update an existing one
--phonebook-delete=[(Phonebook index)]: Delete phonebook entry with given index
--phonebook-delete-all: Delete all phonebook entries

Device Service Stream options:

--dss-connect=[(UUID),(Session ID)]: Connect DSS session
--dss-disconnect=[(UUID),(Session ID)]: Disconnect DSS session

Microsoft Firmware ID options:

--ms-query-firmware-id: Query firmware ID

Microsoft Host Shutdown options:

--ms-notify-host-shutdown: Notify that host is shutting down

Microsoft SAR options:

--ms-set-sar-config=[(device|os),(enabled|disabled)[,[{antenna_index,backoff_index}...]]]: Set SAR config
--ms-query-sar-config: Query SAR config
--ms-set-transmission-status=[(enabled|disabled),(timer)]: Set transmission status and hysteresis timer (in seconds)
--ms-query-transmission-status: Query transmission status

AT&T Device Service options:

--atds-query-signal: Query signal info
--atds-query-location: Query cell location

Intel Firmware Update Service options:

--intel-modem-reboot=[(Boot Mode),(Timeout)]: Reboot modem. Boot mode and timeout arguments only required if MBIMEx >= 2.0.

Microsoft Basic Connect Extensions options:

--ms-query-pco=[SessionID]: Query PCO value (SessionID is optional, defaults to 0)
--ms-query-lte-attach-configuration: Query LTE attach configuration
--ms-query-lte-attach-info: Query LTE attach status information
--ms-query-sys-caps: Query system capabilities
--ms-query-device-caps: Query device capabilities
--ms-query-slot-info-status=[SlotIndex]: Query slot information status
--ms-set-device-slot-mappings=[(SlotIndex)[,(SlotIndex)[,...]]]: Set device slot mappings for each executor
--ms-query-device-slot-mappings: Query device slot mappings
--ms-query-location-info-status: Query location info status
--ms-set-provisioned-contexts=["key=value,..."]: Set provisioned contexts (allowed keys: operation, context-type, ip-type, state, roaming-control, media-type, source, auth, compression, username, password, access-string)
--ms-query-provisioned-contexts: Query provisioned contexts
--ms-query-base-stations-info: Query base stations info
--ms-query-version=[(MBIM version),(MBIM extended version)]: Exchange supported version information. Since MBIMEx v2.0.
--ms-query-registration-parameters: Query registration parameters. Since MBIMEx v3.0.
--ms-set-registration-parameters=["key=value,..."]: Set registration parameters (required keys: mico-mode, drx-cycle, ladn-info, default-pdu-activation-hint, re-register-if-needed). Since MBIMEx v3.0.
--ms-query-modem-configuration: Query modem configuration. Since MBIMEx v3.0.
--ms-query-wake-reason: Query wake reason. Since MBIMEx v3.0.

Quectel options:

--quectel-query-radio-state: Query radio state
--quectel-set-radio-state=[(on)]: Set radio state

Link management options:

--link-list=[IFACE]: List links created from a given interface
--link-add=[iface=IFACE,prefix=PREFIX[,session-id=N]]: Create new network interface link
--link-delete=IFACE: Delete a given network interface link
--link-delete-all=[IFACE]: Delete all network interface links from the given interface

Intel Thermal RF Service options:

--intel-query-rfim: Query RFIM frequency information
--intel-set-rfim=[(on|off)]: Enable or disable RFIM (disabled by default)

Microsoft Voice Extensions Service options:

--ms-query-nitz: Query network identity and time zone

Microsoft UICC Low Level Access Service options:

--ms-query-uicc-application-list: Query UICC application list
--ms-query-uicc-file-status=["key=value,..."]: Query UICC file status (allowed keys: application-id, file-path)
--ms-query-uicc-read-binary=["key=value,..."]: Read UICC binary file (allowed keys: application-id, file-path, read-offset, read-size, local-pin and data)
--ms-query-uicc-read-record=["key=value,..."]: Read UICC record file (allowed keys: application-id, file-path, record-number, local-pin and data)
--ms-set-uicc-open-channel=["key=value,..."]: Set UICC open channel (allowed keys: application-id, selectp2arg, channel-group)
--ms-set-uicc-close-channel=["key=value,..."]: Set UICC close channel (allowed keys: channel, channel-group)
--ms-query-uicc-atr: Query UICC atr
--ms-set-uicc-apdu=["key=value,..."]: Set UICC apdu (allowed keys: channel, secure-message, classbyte-type, command)
--ms-set-uicc-reset=[(Pass Through Action)]: Set UICC reset
--ms-query-uicc-reset: Query UICC reset
--ms-set-uicc-terminal-capability=["key=value,..."]: Set UICC terminal capability (allowed keys: terminal-capability)
--ms-query-uicc-terminal-capability: Query UICC terminal capability

Application Options:

-d, --device=[PATH]: Specify device path
-p, --device-open-proxy: Request to use the 'mbim-proxy' proxy
--device-open-ms-mbimex-v2: Request to enable Microsoft MBIMEx v2.0 support
--device-open-ms-mbimex-v3: Request to enable Microsoft MBIMEx v3.0 support
--no-open=[Transaction ID]: Do not explicitly open the MBIM device before running the command
--no-close: Do not close the MBIM device after running the command
--noop: Don't run any command
-v, --verbose: Run action with verbose logs, including the debug ones
--verbose-full: Run action with verbose logs, including the debug ones and personal info
--silent: Run action with no logs; not even the error/warning ones
-V, --version: Print version

COPYRIGHT

Copyright © 2013-2021 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.