NAME

qmicli - Control QMI devices

DESCRIPTION

Usage:

qmicli [OPTION?] - Control QMI devices

Help Options:

-h, --help: Show help options
--help-all: Show all help options
--help-dms: Show Device Management Service options
--help-nas: Show Network Access Service options
--help-wds: Show Wireless Data Service options
--help-pbm: Show Phonebook Management options
--help-pdc: Show platform device configurations options
--help-uim: Show User Identity Module options
--help-sar: Show Specific Absorption Rate options
--help-wms: Show Wireless Messaging Service options
--help-wda: Show Wireless Data Administrative options
--help-voice: Show Voice Service options
--help-loc: Show location options
--help-qos: Show Quality of Service options
--help-gas: Show General Application Service options
--help-gms: Show General Modem Service options
--help-dsd: Show Data System Determination options
--help-dpm: Show Data Port Mapper Service options
--help-fox: Show Foxconn Modem Service options
--help-link-management: Show link management specific options
--help-qmiwwan: Show qmi_wwan driver specific options

DMS options:

--dms-get-ids: Get IDs
--dms-get-capabilities: Get capabilities
--dms-get-manufacturer: Get manufacturer
--dms-get-model: Get model
--dms-get-revision: Get revision
--dms-get-msisdn: Get MSISDN
--dms-get-power-state: Get power state
--dms-uim-set-pin-protection=[(PIN|PIN2),(disable|enable),(current PIN)]: Set PIN protection in the UIM
--dms-uim-verify-pin=[(PIN|PIN2),(current PIN)]: Verify PIN
--dms-uim-unblock-pin=[(PIN|PIN2),(PUK),(new PIN)]: Unblock PIN
--dms-uim-change-pin=[(PIN|PIN2),(old PIN),(new PIN)]: Change PIN
--dms-uim-get-pin-status: Get PIN status
--dms-uim-get-iccid: Get ICCID
--dms-uim-get-imsi: Get IMSI
--dms-uim-get-state: Get UIM State
--dms-uim-get-ck-status=[(pn|pu|pp|pc|pf)]: Get CK Status
--dms-uim-set-ck-protection=[(pn|pu|pp|pc|pf),(disable),(key)]: Disable CK protection
--dms-uim-unblock-ck=[(pn|pu|pp|pc|pf),(key)]: Unblock CK
--dms-get-hardware-revision: Get the HW revision
--dms-get-operating-mode: Get the device operating mode
--dms-set-operating-mode=[(Operating mode)]: Set the device operating mode
--dms-get-time: Get the device time
--dms-get-prl-version: Get the PRL version
--dms-get-activation-state: Get the state of the service activation
--dms-activate-automatic=[Activation Code]: Request automatic service activation
--dms-activate-manual=[SPC,SID,MDN,MIN]: Request manual service activation
--dms-get-user-lock-state: Get the state of the user lock
--dms-set-user-lock-state=[(disable|enable),(current lock code)]: Set the state of the user lock
--dms-set-user-lock-code=[(old lock code),(new lock code)]: Change the user lock code
--dms-read-user-data: Read user data
--dms-write-user-data=[(User data)]: Write user data
--dms-read-eri-file: Read ERI file
--dms-restore-factory-defaults=[(Service Programming Code)]: Restore factory defaults
--dms-validate-service-programming-code=[(Service Programming Code)]: Validate the Service Programming Code
--dms-set-firmware-id: Set firmware id
--dms-get-band-capabilities: Get band capabilities
--dms-get-factory-sku: Get factory stock keeping unit
--dms-list-stored-images: List stored images
--dms-select-stored-image=[modem#,pri#] where # is the index: Select stored image
--dms-delete-stored-image=[modem#|pri#] where # is the index: Delete stored image
--dms-get-firmware-preference: Get firmware preference
--dms-set-firmware-preference=["key=value,..."]: Set firmware preference (required keys: firmware-version, config-version, carrier; optional keys: modem-storage-index, override-download=yes)
--dms-get-boot-image-download-mode: Get boot image download mode
--dms-set-boot-image-download-mode=[normal|boot-and-recovery]: Set boot image download mode
--dms-get-software-version: Get software version
--dms-set-fcc-authentication: Set FCC authentication
--dms-get-supported-messages: Get supported messages
--dms-hp-change-device-mode=[fastboot]: Change device mode (HP specific)
--dms-swi-get-current-firmware: Get Current Firmware (Sierra Wireless specific)
--dms-swi-get-usb-composition: Get current and supported USB compositions (Sierra Wireless specific)
--dms-swi-set-usb-composition=[#]: Set USB composition (Sierra Wireless specific)
--dms-foxconn-change-device-mode=[fastboot-ota|fastboot-online]: Change device mode (Foxconn specific)
--dms-foxconn-get-firmware-version=[firmware-mcfg-apps|firmware-mcfg|apps]: Get firmware version (Foxconn specific)
--dms-foxconn-set-fcc-authentication=[magic]: Set FCC authentication (Foxconn specific)
--dms-foxconn-set-fcc-authentication-v2=[magic-string,magic-number]: Set FCC authentication (Foxconn specific, v2)
--dms-get-mac-address=[wlan|bt]: Get default MAC address
--dms-reset: Reset the service state
--dms-noop: Just allocate or release a DMS client. Use with `--client-no-release-cid' and/or `--client-cid'

NAS options:

--nas-get-signal-strength: Get signal strength
--nas-get-signal-info: Get signal info
--nas-get-tx-rx-info=[(Radio Interface)]: Get TX/RX info
--nas-get-home-network: Get home network
--nas-get-serving-system: Get serving system
--nas-get-system-info: Get system info
--nas-get-technology-preference: Get technology preference
--nas-get-preferred-networks: Get preferred networks
--nas-set-preferred-networks=[[MCCMNC,access_tech],...]: Set preferred networks list
--nas-get-system-selection-preference: Get system selection preference
--nas-set-system-selection-preference=[cdma-1x|cdma-1xevdo|gsm|umts|lte|td-scdma][,[automatic|manual=MCCMNC]]: Set system selection preference
--nas-network-scan: Scan networks
--nas-get-cell-location-info: Get Cell Location Info
--nas-force-network-search: Force network search
--nas-get-operator-name: Get operator name data
--nas-get-plmn-name=[mccmnc]: Get plmn name data
--nas-get-lte-cphy-ca-info: Get LTE Cphy CA Info
--nas-get-rf-band-info: Get RF Band Info
--nas-get-drx: Get DRX
--nas-get-supported-messages: Get supported messages
--nas-swi-get-status: Get status ((Sierra Wireless specific)
--nas-reset: Reset the service state
--nas-noop: Just allocate or release a NAS client. Use with `--client-no-release-cid' and/or `--client-cid'

WDS options:

--wds-start-network=["key=value,..."]: Start network (allowed keys: apn, 3gpp-profile, 3gpp2-profile, auth (PAP|CHAP|BOTH), username, password, autoconnect=yes, ip-type (4|6))
--wds-follow-network: Follow the network status until disconnected. Use with `--wds-start-network'
--wds-stop-network=[Packet data handle] OR [disable-autoconnect]: Stop network
--wds-get-current-settings: Get current settings
--wds-get-packet-service-status: Get packet service status
--wds-get-packet-statistics: Get packet statistics
--wds-get-data-bearer-technology: Get data bearer technology
--wds-get-current-data-bearer-technology: Get current data bearer technology
--wds-go-dormant: Make the active data connection go dormant
--wds-go-active: Make the active data connection go active
--wds-get-dormancy-status: Get the dormancy status of the active data connection
--wds-create-profile=["(3gpp|3gpp2)[,key=value,...]"]: Create new profile using first available profile index (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)
--wds-swi-create-profile-indexed=["(3gpp|3gpp2),#[,key=value,...]"]: Create new profile at specified profile index [Sierra Wireless specific] (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)
--wds-modify-profile=["(3gpp|3gpp2),#,key=value,..."]: Modify existing profile (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)
--wds-delete-profile=[(3gpp|3gpp2),#]: Delete existing profile
--wds-get-profile-list=[3gpp|3gpp2]: Get profile list
--wds-get-default-profile-number=[3gpp|3gpp2]: Get default profile number
--wds-set-default-profile-number=[(3gpp|3gpp2),#]: Set default profile number
--wds-get-default-settings=[3gpp|3gpp2]: Get default settings
--wds-get-autoconnect-settings: Get autoconnect settings
--wds-set-autoconnect-settings=[(enabled|disabled|paused)[,(roaming-allowed|home-only)]]: Set autoconnect settings (roaming settings optional)
--wds-get-supported-messages: Get supported messages
--wds-reset: Reset the service state
--wds-bind-data-port=[a2-mux-rmnet0-7|#]: Bind data port to controller device to be used with `--client-no-release-cid'
--wds-bind-mux-data-port=["key=value,..."]: Bind qmux data port to controller device (allowed keys: mux-id, ep-type (undefined|hsusb|pcie|embedded|bam-dmux), ep-iface-number) to be used with `--client-no-release-cid'
--wds-set-ip-family=[4|6]: Set IP family
--wds-get-channel-rates: Get channel data rates
--wds-get-lte-attach-parameters: Get LTE attach parameters
--wds-get-max-lte-attach-pdn-num: Get the maximum number of LTE attach PDN
--wds-get-lte-attach-pdn-list: Get the list of LTE attach PDN
--wds-set-lte-attach-pdn-list=[#,#,...]: Set the list of LTE attach PDN
--wds-noop: Just allocate or release a WDS client. Use with `--client-no-release-cid' and/or `--client-cid'

PBM options:

--pbm-get-all-capabilities: Get all phonebook capabilities
--pbm-noop: Just allocate or release a PBM client. Use with `--client-no-release-cid' and/or `--client-cid'

PDC options:

--pdc-list-configs=[(platform|software)]: List all configs
--pdc-delete-config=[(platform|software),ConfigId]: Delete config
--pdc-activate-config=[(platform|software),ConfigId]: Activate config
--pdc-deactivate-config=[(platform|software),ConfigId]: Deactivate config
--pdc-load-config=[Path to config]: Load config to device
--pdc-monitor-refresh: Watch for refresh indications
--pdc-noop: Just allocate or release a PDC client. Use with `--client-no-release-cid' and/or `--client-cid'

UIM options:

--uim-set-pin-protection=[(PIN1|PIN2|UPIN),(disable|enable),(current PIN)]: Set PIN protection
--uim-verify-pin=[(PIN1|PIN2|UPIN),(current PIN)]: Verify PIN
--uim-unblock-pin=[(PIN1|PIN2|UPIN),(PUK),(new PIN)]: Unblock PIN
--uim-change-pin=[(PIN1|PIN2|UPIN),(old PIN),(new PIN)]: Change PIN
--uim-read-transparent=[0xNNNN,0xNNNN,...]: Read a transparent file given the file path
--uim-get-file-attributes=[0xNNNN,0xNNNN,...]: Get the attributes of a given file
--uim-read-record=["key=value,..."]: Read a record from given file (allowed keys: record-number, record-length, file ([0xNNNN-0xNNNN,...])
--uim-get-card-status: Get card status
--uim-get-supported-messages: Get supported messages
--uim-sim-power-on=[(slot number)]: Power on SIM card
--uim-sim-power-off=[(slot number)]: Power off SIM card
--uim-change-provisioning-session=["key=value,..."]: Change provisioning session (allowed keys: session-type, activate, slot, aid)
--uim-get-slot-status: Get slot status
--uim-switch-slot=[(slot number)]: Switch active physical slot
--uim-monitor-slot-status: Watch for slot status indications
--uim-reset: Reset the service state
--uim-monitor-refresh-file=[0xNNNN,0xNNNN,...]: Watch for REFRESH events for given file paths
--uim-monitor-refresh-all: Watch for REFRESH events for any file
--uim-get-configuration: Get personalization status of the modem
--uim-depersonalization=[(feature),(operation),(control key)[,(slot number)]]: Deactivates or unblocks personalization feature
--uim-noop: Just allocate or release a UIM client. Use with `--client-no-release-cid' and/or `--client-cid'

SAR options:

--sar-rf-get-state: Get RF state
--sar-rf-set-state=[(state number)]: Set RF state.
--sar-noop: Just allocate or release a SAR client. Use with `--client-no-release-cid' and/or `--client-cid'

WMS options:

--wms-get-supported-messages: Get supported messages
--wms-get-routes: Get SMS route information
--wms-set-routes=["key=value,..."]: Set SMS route information (keys: type, class, storage, receipt-action)
--wms-reset: Reset the service state
--wms-noop: Just allocate or release a WMS client. Use with `--client-no-release-cid' and/or `--client-cid'

WDA options:

--wda-set-data-format=["key=value,..."]: Set data format (allowed keys: link-layer-protocol (802-3|raw-ip), ul-protocol (disabled|tlp|qc-ncm|mbim|rndis|qmap|qmapv5), dl-protocol (disabled|tlp|qc-ncm|mbim|rndis|qmap|qmapv5), dl-datagram-max-size, dl-max-datagrams, ep-type (undefined|hsusb|pcie|embedded), ep-iface-number, ul-datagram-max-size, ul-max-datagrams)
--wda-get-data-format=["key=value,..."]: Get data format (allowed keys: ep-type (undefined|hsusb|pcie|embedded), ep-iface-number); also allows empty key list
--wda-get-supported-messages: Get supported messages
--wda-noop: Just allocate or release a WDA client. Use with `--client-no-release-cid' and/or `--client-cid'

VOICE options:

--voice-get-config: Get Voice service configuration
--voice-get-supported-messages: Get supported messages
--voice-noop: Just allocate or release a VOICE client. Use with `--client-no-release-cid' and/or `--client-cid'

LOC options:

--loc-session-id=[ID]: Session ID for the LOC session
--loc-start: Start location gathering
--loc-stop: Stop location gathering
--loc-get-position-report: Get position reported by the location module
--loc-get-gnss-sv-info: Show GNSS space vehicle info
--loc-timeout=[SECS]: Maximum time to wait for information in `--loc-get-position-report' and `--loc-get-gnss-sv-info' (default 30s)
--loc-follow-position-report: Follow all position updates reported by the location module indefinitely
--loc-follow-gnss-sv-info: Follow all GNSS space vehicle info updates reported by the location module indefinitely
--loc-follow-nmea: Follow all NMEA trace updates reported by the location module indefinitely
--loc-delete-assistance-data: Delete positioning assistance data
--loc-get-nmea-types: Get list of enabled NMEA traces
--loc-set-nmea-types=[type1|type2|type3...]: Set list of enabled NMEA traces
--loc-get-operation-mode: Get operation mode
--loc-set-operation-mode=[default|msb|msa|standalone|cellid|wwan]: Set operation mode
--loc-get-engine-lock: Get engine lock status
--loc-set-engine-lock=[none|mi|mt|all]: Set engine lock status
--loc-noop: Just allocate or release a LOC client. Use with `--client-no-release-cid' and/or `--client-cid'

QoS options:

--qos-get-flow-status=[QoS ID]: Get QoS flow status
--qos-get-network-status: Gets the network status
--qos-swi-read-data-stats=[APN ID]: Read data stats (Sierra Wireless specific)
--qos-reset: Reset the service state
--qos-noop: Just allocate or release a QOS client. Use with `--client-no-release-cid' and/or `--client-cid'

GAS options:

--gas-dms-set-usb-composition=[pid]: Sets the USB composition
--gas-dms-get-usb-composition: Gets the current USB composition
--gas-dms-get-firmware-list: Gets the list of stored firmware
--gas-dms-get-active-firmware: Gets the currently active firmware
--gas-dms-set-active-firmware=[index]: Sets the active firmware index
--gas-noop: Just allocate or release a GAS client. Use with `--client-no-release-cid' and/or `--client-cid'

GMS options:

--gms-test-get-value: Gets test value
--gms-test-set-value=[mandatory-value][,[optional-value]]: Sets test value
--gms-noop: Just allocate or release a GMS client. Use with `--client-no-release-cid' and/or `--client-cid'

DSD options:

--dsd-get-apn-info=[(type)]: Gets the settings associated to a given APN type
--dsd-set-apn-type=[(name), (type1|type2|type3...)]: Sets the types associated to a given APN name
--dsd-get-system-status: Gets system status
--dsd-noop: Just allocate or release a DSD client. Use with `--client-no-release-cid' and/or `--client-cid'

DPM options:

--dpm-open-port=["key=value,..."]: Open port (allowed-keys: ctrl-ep-type, ctrl-ep-iface-number, ctrl-port-name, hw-data-ep-type, hw-data-ep-iface-number, hw-data-rx-id, hw-data-tx-id, sw-data-ep-type, sw-data-ep-iface-number, sw-data-port-name)
--dpm-close-port: Close port
--dpm-noop: Just allocate or release a DPM client. Use with `--client-no-release-cid' and/or `--client-cid'

FOX options:

--fox-get-firmware-version=[firmware-mcfg-apps|firmware-mcfg|apps]: Get firmware version
--fox-noop: Just allocate or release a FOX client. Use with `--client-no-release-cid' and/or `--client-cid'

Link management options:

--link-list=[IFACE]: List links created from a given interface
--link-add=[iface=IFACE,prefix=PREFIX[,mux-id=N][,flags=FLAGS]]: Create new network interface link
--link-delete=[link-iface=IFACE][,[mux-id=N]]: Delete a given network interface link
--link-delete-all=[IFACE]: Delete all network interface links from the given interface

qmi_wwan specific options:

-w, --get-wwan-iface: Get the associated WWAN iface name
-e, --get-expected-data-format: Get the expected data format in the WWAN iface
-E, --set-expected-data-format=[802-3|raw-ip|qmap-pass-through]: Set the expected data format in the WWAN iface

Application Options:

-d, --device=[PATH|URI]: Specify device path or QRTR URI (e.g. qrtr://0)
--get-service-version-info: Get service version info
--device-set-instance-id=[Instance ID]: Set instance ID
--device-open-version-info: Run version info check when opening device
--device-open-sync: Run sync operation when opening device
-p, --device-open-proxy: Request to use the 'qmi-proxy' proxy
--device-open-qmi: Open a cdc-wdm device explicitly in QMI mode
--device-open-mbim: Open a cdc-wdm device explicitly in MBIM mode
--device-open-auto: Open a cdc-wdm device in either QMI or MBIM mode (default)
--device-open-net=[net-802-3|net-raw-ip|net-qos-header|net-no-qos-header]: Open device with specific link protocol and QoS flags
--client-cid=[CID]: Use the given CID, don't allocate a new one
--client-no-release-cid: Do not release the CID when exiting
-v, --verbose: Run action with verbose logs, including the debug ones
--verbose-full: Run action with verbose logs, including the debug ones and personal info
--silent: Run action with no logs; not even the error/warning ones
-V, --version: Print version

COPYRIGHT

Copyright © 2012-2022 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.